Iwaki-America manufactures a broad range of small non-metallic centrifugal and positive displacement pumps for OEM applications for fluid and air transfer. Because of their compact size, availability in AC or DC power, and chemically inert materials of construction, these pumps can be an option for a tremendous range of OEM applications in medical, biotech, analyzer, laboratory, fuel cell, laser cooling, chiller and precision dosing applications.
All pumps offer seal-less design, normally using magnetic coupling. These seal-less pumps will not leak the pumped fluid, even after years of operation.
Iwaki offers these pump designs for OEM application:
Quick Links: Diahpragm | Gear | Regenerative Turbine
Rotary Piston | Syringe | Bellows Metering | Diaphragm Metering
CENTRIFUGAL
NRD / RD Series (DC)
Models: 8 sizes
Flow Rate: 18.5 GPM max
Max Head: 49.2 Feet
Construction: Polypropylene, Ryton, Ceramic, Viton or EPDM
Motor: 24V DC brushless canned motor style
Life: 25,000+ Hrs
DDC Series (DC)
Models: 1 model, with 4 different impeller/speed options
Flow Rate: 2.3 GPM
Max Head: 22 Feet
Construction: Ryton, 316SS, EPDM, Carbon
Motor: 12V brushless canned motor style
Life: 50,000 Hrs
MD Series (DC)
Models: 3 models, each with different impeller options
Flow Rate: 10 GPM max
Max Head: 37 Feet TDH max
Construction: Polypropylene with ceramic bearings and Viton o-ring
Motor: 24V, 20, 32 or 56 watt brushless DC
MD / WMD Series (AC)
Models: 9 models, each with different impeller options
Flow Rate: 36 GPM max
Max Head: 66 Feet TDH max
Construction: Polypropylene or Teflon with ceramic bearings and Viton o-ring
Motor: 1/3 HP and below, 1 ph, 115, 230V, 50/60 Hz, TEFC motor
MX Series (AC)
Models: 14 models standard, 3 models self-primer (SMX), Dry Run configuration available
Flow Rate: 130 GPM max
Max Head: 128 Feet
Construction: Polypropylene or Teflon (E-TFE) components. Carbon, Ceramic or Silicon Carbide bearings
Motor: 0.5 – 3 HP, standard NEMA C frame mounting.
DIAPHRAGM (AIR AND LIQUID)
APN-W Series (DC)
Models: 6 models
Flow Rate: 500 ml/min max water, 4000 ml/min max air
Max Head: Up to 11.6 psi max, 10” Hg Max vacuum, (26” Hg max on smallest size)
Construction: Polypropylene with Viton, EPDM, Teflon or Perfluoro diaphragm & Gasket
Motor: 12 or 24V, brushless DC
APN Low Voltage (DC)
Models: 1 size, air only, designed for use in negative wound therapy application
Flow Rate: 1.5 lpm max
Max Head: 3.8 psi pressure or vacuum
Construction: Polypropylene with EPDM
Motor: 4.5 V, brushless DC
APN Series (AC or DC)
Models: 5 simplex, 1 duplex – for use on Air Only
Flow Rate: 110 lpm max
Max Head: 29 psi (7.25 psi on smallest model)
Construction: Polypropylene, Aluminum or 304SS body, with Viton, EPDM, Nitrile and Ryton internals
Motor: 1 ph, 110 or 220V, 50 or 60 Hz, or 21 or 24V DC (up to 28 lpm models)
GEAR
MDG Series (DC)
Models: 2 sizes
Flow Rate: 0.46 GPM
Max Head: 44 psi
Construction: Ryton, with 316SS and Viton internals
Motor: 24V, Brushless DC, 10 or 14 Watt motor
REGENERATIVE TURBINE
MDT Series (AC)
Models: 2 models
Flow Rate: 5.3 GPM Max
Max Head: 51 psi
Construction: Ryton, PEEK, EPDM and Carbon or Silicon Carbide
Motor: 220W, 110 or 220 V, 1 ph, 60 Hz (50 Hz version also available)
ROTARY PISTON
Hicera Series (DC)
Models: 3 sizes, each with 2 to 7 gear ratio options on motor
Flow Rate: 1.6 – 1400 ml/min
Max Head: 101 psi (29 psi on largest model)
Construction: 316 SS or Investment Cast SCS14, with Teflon, 316SS, Ceramic or Silicon Carbide internals
Motor: 115V, 1 ph, 60 Hz, 15 – 40 Watt motors
SYRINGE
SPV/SPX Series (DC)
Models: 4 models each, SPV – High Resolution 6000 steps/stroke, SPX – compact
Flow Rate: 100 micro-liter – 1000 micro-liter
Max Head: <1 psi continuous, <100 psi intermittent
Construction: Acrylic, PEEK, Polyethylene and Borosilicate Glass
Motor: 4 V DC Stepper motor
Life: 1,000,000+ strokes
BELLOWS METERING
KBR Series (AC)
Models: 10 simplex, 2 duplex on largest 2 sizes
Flow Rate: 4.9 ml/min to 2100 ml/min (33.3 GPH)
Max Head: 1.45 psi typical. 10 psi on smallest model
Construction: Polypropylene with EPDM or Viton bellows and valves
Motor: 115 or 230V, 1 ph, 50 or 60 Hz
DIAPHRAGM METERING
HRP Series (DC)
Models: 1 size, with 2 voltage options
Flow Rate: 0.055 – 38 ml/min
Max Head: 29 psi
Construction: Kynar body, with Viton, Ceramic and Teflon or EPDM internals
Motor: 12 or 24V, 5.6 W, electromagnetic DC motor
LK Series (AC)
Models: 5 sizes, 5 liquid end construction options for each
Flow Rate: 114.3 GPH max
Max Head: 225 psi, down to 45 psi on largest model
Construction: PVC, Kynar or 316SS body. Ceramic, Hastelloy C276, 316SS, Viton, & EPDM components
Motor: 1/3 HP, 1 or 3 ph, 50/60 Hz motor, TEFC, XP or Inverter duty available
IBX Series (AC)
Models: 7 sizes. Digitally ‘Smart’ controlled, 1000:1 turndown
Flow Rate: 1.98 GPH max through 79.2 GPH max
Max Head: 73-145 psi (247 psi on smallest model)
Construction: PVDF body with EPDM or Viton & Ceramic or 316SS body with Teflon
Motor: 17 – 110Watt, 115 or 230V, 1 ph, 50 or 60 Hz motors